Two-winding compressor, high efficiency and low noise. The air-cooled chiller uses a new generation HFC -134a high-performance two-wheel compressor, which has an asymmetrical rotor design of 5:6, a new screw profile and an oil injection system.
Optimal rotor design The new generation of highly efficient double-cylinder compressor HFC-134a uses a new optimized asymmetric rotor profile 5: 6, manufactured using a patented manufacturing process that ensures the accuracy of rotor processing and optimal rotor spacing.
Винтовой ротор, изготовленный методом однократной формовки, эффективно предотвращает повреждение от напряжения при поздней обработке и обеспечивает более высокую твердость винта и скорость линии кромки, более короткий ход сжатия и более эффективное сжатие.
Two-layer sheath for pressure compensation
Inlet Air Filter Oil Separator Oil Heater The compressor design includes an oil heater, thanks to for which the lubricating oil retains sufficient viscosity after prolonged exposure. stopping the unit, ensuring the compressor's reliable operation. The two-layer air intake screen with a large area is designed to ensure high strength and low pressure losses, not only completely Protecting the compressor and ensuring long-term efficiency. compressors. Innovative built-in three-stage oil separator uses an internal three-section oil filter and works together with a high-density grid to achieve an optimal oil and gas separation rate of more than 99.8%. The pressure compensation two-layer coating, made by precision casting of cast iron with spherical graphite, is subjected to precision processing on an M/C machine, to check the processing accuracy, a three-dimensional measuring device is used to ensure that the gap and accuracy of the compressor meet the requirements for efficient operation, and the two-wall coating is sufficiently stable and does not deform even in the case of high pressure.This not only meets the pressure requirements, but also reduces noise levels. The compressor body is made by a two-stage casting method and is divided into the compression side and the oil separation side, which ensures better performance during pressure injection. Embedded reduction the safety valve can connect the high-pressure and low-pressure chambers to release the pressure, and the relative outer safety valve allows you to avoid the direct leakage of the refrigerant into the air.
Podshipnik
The patented closed-loop pressure drop chamber of the pulley operates with a durable pulley and a pressure drop device. The design of the pressure bearing with double bearings is adopted in the axial direction to make the bearing strong and durable. The substrate chamber is separated from the chamber.
High pressure for lowering pressure in the podshipper chamber. Effective and ensures the viscosity of the lubricating oil in the podshipper cavity. Lubricates the substrate, increases its service life and ensures the safe operation of the unit.
Series: CHILLER WITH AIR COOLING AND A SCREW COMPRESSOR